既可單獨工作也可任意組合控制，這是ET系列多功能時控器的一大亮點--多功能
This is a highlight of ET series multi-function time controller multi-function time controller
模式1：普通時控模式，用戶設
Mode 1: normal time control mode, user set
定開關燈時間，開燈范圍00:00到23:59；關燈范圍00:00到23:59
Set the time of turning on and off lights, the range of turning on lights is from 00:00 to 23:59, and the range of turning off lights is from 00:00 to 23:59
模式2：光控模式，開關燈時間由光控探頭根據事先設置的光照度進行控制
Mode 2: light control mode, the light switch time is controlled by the light control probe according to the preset light intensity
模式3：光控時控模式，是同時啟用模式1和模式2兩種功能，光控優先級高于時控優先級。當時間處在光控開啟的時間段內，系統采用光控模式，否則采用時控模式。能實現白天暴雨、濃霧燈天氣開燈，晚上半夜關燈?？刂破鬏敵鰹椴⑿休敵?，兩種模式均可共用同一個端口輸出。
Mode 3: light control time control mode, which enables mode 1 and mode 2 functions at the same time, and light control priority is higher than time control priority. When the time is in the period of light control on, the system adopts light control mode, otherwise it adopts time control mode. It can turn on the light in heavy rain and fog in the daytime and turn off the light in the middle of the night. The output of the controller is parallel, and the two modes can share the same output port.
5、光控和時控功能開啟或關閉可任意獨立控制；
5. The light control and time control functions can be opened or closed independently;
6、光照度控制動作點可任意編程設定：光照度自由設定；
6. The illumination control action point can be set arbitrarily: the illumination can be set freely;
7、光控參數一旦設置立即在液晶屏上同時顯示光控設定參數和光照度值；
7. Once the light control parameters are set, the light control setting parameters and illumination values are displayed on the LCD screen at the same time;
8、光控輸出回路可任意定義：根據需要可以在輸出1-2回路中任意指定哪路或幾路為光控節能輸出，這是ET10x.1多功能時控器的一大亮點—輸出定義靈活；
8. Optical control output circuit can be defined at will: according to the need, which one or more of the output 1-2 circuits can be specified as the optical control energy-saving output, which is a highlight of et10x. 1 multi-functional time controller - flexible output definition;
9、內置二級防雷電路，增強設備可靠性，抗干擾能力強
9. Built in secondary lightning protection circuit, enhance equipment reliability, strong anti-interference ability
10、流水線作業生產，確保產品質量一致性,“三防”處理電路板、適應惡劣環境可靠性更高；
10. Assembly line production to ensure product quality consistency, "three proofs" processing circuit board, adapt to harsh environment, higher reliability;
11、可裝備用電池，備用電池啟用時1分鐘內無人操作自動關機(增加備用電池使用壽命)
11. It can be equipped with battery. When the backup battery is enabled, it will be automatically shut down by unmanned operation within 1 minute (increase the service life of the backup battery)
12、設置數據自動保存，保存時間>10年
12. Set data auto save, save time > 10 years
13、輸出回路：1-2路，每路4時段任意編程設定
13. Output circuit: 1-2 channels, each channel can be programmed for 4 periods
14、內置開關電源模塊，適用85~265VAC的寬電壓范圍。
14. Built in switching power supply module, suitable for 85 ~ 265vac wide voltage range.
15、內置可充電電池，使用更加方便。無外部電源時，10s鐘內無人操作自動待機。
15. Built in rechargeable battery, more convenient to use. When there is no external power supply, no one will operate within 10s and stand by automatically.