1.控制器通電后，使用微信掃描開關上的二維碼，進入小程序管理頁面。
2.點擊添加設備，點擊創建新項目，輸入項目名稱、選擇位置后點擊下一步，點擊添加設備。
3.兩種添加設備的方式：a.掃描開關上的條碼，進行添加。b.打開手機藍牙和GPS，搜索手機15米內的開關進行添加。點擊開關名稱，進入小程序控制頁面。
4.可手動對開關進行控制。也可以設置定時開關。
5.兩種定時模式：a.點擊經緯模式，點擊經緯度定時設置，選擇開啟和關閉的規則，點擊確定。點擊保存定時設置。
b.點擊自定義模式，點擊添加定時組，設置定時開、關的時間（星期、小時、分鐘都是滑動選擇，選擇完成后記得點擊確定），點擊確定。點擊保存定時設置。
1. After the controller is powered on, use wechat to scan the QR code on the switch and enter the applet management page.
2. Click add equipment, click create new project, enter the project name, select the location, click next, and click add equipment.
3. Two ways to add equipment: A. scan the barcode on the switch to add. b. Turn on the Bluetooth and GPS of the mobile phone and search the switch within 15 meters of the mobile phone to add. Click the switch name to enter the applet control page.
4. The switch can be controlled manually. The timing switch can also be set.
5. Two timing modes: A. click the latitude and longitude mode, click the latitude and longitude timing setting, select the opening and closing rules, and click OK. Click Save timing settings.
b. Click Custom mode, click Add timing group, set the timing on and off time (week, hour and minute are sliding selection, remember to click OK after selection), and click OK. Click Save timing settings.
